Panel Radiator
Another comfortable and enjoyable product that will not require you to limit your expectations in standards.
Strong and Striking, Rich and Enjoyable for those who want to reflect the quality of life to their spaces.
1 – BOTTOM OPEN END CONNECTION
It can be applied to all models. The “Direction Plug” supplied with the radiator free of charge is placed between 3-4 slices in radiators from the direction of hot water inlet to the 10th slice, and between 4-5 slices in radiators larger than 10 slices. The air vent valve should be installed across the direction plug.
2 – CROSS-CONNECTION
It can be applied to all models. Hot water inlet and air vent valve must be at the top.
3 – PARALLEL CONNECTION
It can be applied to all models. Hot water inlet and air vent valve must be at the top.
4 – BOTTOM ENTRANCE OUTLET (HB) CONNECTION
It can be applied to all models. Direction plug is installed during factory manufacturing. Hot water inlet should be made from the outside and cold water outlet should be made from the inside. If hot water is input from the opposite side, only the 4th slice will be heated.
5 – COMPACT INTEGRATED THERMOSTATIC VALVE CONNECTION
It can be applied to all models. Direction plug is installed during factory manufacturing. Hot water inlet should be made from the outside and cold water outlet should be made from the inside. The thermostat and its special core should be the same with the hot water inlet direction.
6 – BY-PASS CONNECTION
It can be applied to all models. Hot water intake is made through the pipe close to the radiator.
